MELRemoPro

MELRemo allows easy initial settings for the air-conditioner remote controllers.

MELRemoPro allows you to connect your smartphone to air-conditioner remote controllers through Bluetooth and make initial settings for the remote controllers.

Features

・Easier initial settings for the remote controller with MELRemoPro.

・Initial settings of a remote controller can be copied to other remote controllers.

・A company logo or an image can be sent to the remote controller to be displayed.

Supported functions

-Energy-save settings

-Timer settings

-Initial settings

-Clock settings

-Logo image transmission

-Copying settings data

Information on MELRemoPro 4.0.0 or later update

The following restrictions apply as the number of functions increases.

*If MELRemoPro data has been saved before MELRemoPro 4.0.0, the data will be deleted when updating to MELRemoPro 4.0.0 or later. The data to be deleted are Energy-save settings, Timer settings, and Initial settings.

*Data saved before MELRemoPro 2.0.2 cannot be transferred to MELRemoPro 4.0.0 or later. If you continue to use the data, please take one of the following actions.

-Please save the contents of the data as a screenshot before updating and enter the data again after updating.

-After updating, please read the data from the remote controller which has set the data.

Note

*Administrator password is required to connect your smartphone to the remote controller. Password can be found on the remote controller.

*Maintenance password is required to use certain functions.

*Before operating the air conditioner from your smartphone, make sure the operation will not adversely affect its surroundings or the occupants.

*Signal transmission error may occur in some environments or if you are too far away from the remote controller. Bringing your smartphone closer to the remote controller may solve the problem.

*MELRemoPro may not be properly displayed on some smartphones and tablet PCs.

*MELRemoPro does not work with Mitsubishi Electric’s RAC units without compatible remote controllers shown below.

*Since the function is upgraded from MELRemoPro 4.0.0, Android less than 7.0.0 are not supported.Please use this application with Android 7.0.0 or later.In addition, please do not update MELRemoPro if you are already using MELRemoPro less than 4.0.0 with Android less than 7.0.0.

*When you start the app on Android 12 or later, a dialog may be displayed asking for permission to access the "Precise" or "approximate" location.

If you use the app, select "Precise" to allow access to location.

If you select "Approximately" and have access permissions, please change the permissions from smartphone's settings.

*MELRemoPro works with the following Mitsubishi Electric’s remote controllers with Bluetooth.

[Compatible remote controllers]

As of April 19th, 2024

・PAR-CT0*MA series

・PAR-4*MA series

[Compatible devices]

MELRemoPro has been verified to work with the following devices.

Galaxy S21+ (Android 13)

Google Pixel4a (Android 13)

Google Pixel8 (Android14)

[Languages]

English, Czech, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean,

Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese,

Turkish

Copyright © 2018 Mitsubishi Electric Corporation All Rights Reserved.